SPECIFICATIONS FHC-A120EA
FHC-B120EA
Spindle Motor (kw(hp)) 5 HP(3.75kw) x 2 ps(Standard)
2 HP(1.5kw) ~ 5HP(3.75kw) (Optional)
Spindle Speed (rpm) 300 ~ 1500rpm (Standard)
800 ~ 2500rpm (Optional)
Frequency Converter (kw) 5HP~15HP (3.75kw~11kw)
Sever-Motor Feeding (kw(hp)) 1.5kw (Optional)
Air Pressure (mpa) 6~8 kg/cm², 120ml/min , 0.6~0.8mpa
Applicable Materals Various pipes including steel, iron, stainless steel, aluminum, bronze
Pipe and Bar
O.D. Outter I.D.
Inner Angle and End Face(mm)
A type workpiece Ø12~Ø60,
B type workpiece Ø50~Ø90,
C type workpiece Ø80~Ø120,
thickness T0.8~5mm
According to length of A、B or C type workpiece
Workpiece Length A type workpiece L25~300mm
B type workpiece L25~250mm
C type workpiece L25~200mm
According to outside of A、B or C type workpiece
Cutterhead (mm) O.D Ø130 Ø12~Ø52,(MAX Ø60) (Standard)
O.D Ø170 Ø50~Ø120, (Optional)
Machine Dimensions (LxWxH) (mm) 2330x1630x2130
Packing Dimensions (LxWxH) (mm) 2400x1700x2200
N.W. (kg) 2200 kg
G.W. (kg) 2500 kg
*This custom machine is designed according to assigned workpieces, specification and drawing. Please specify the OD, ID, end-face, chamfering angle and end knurling of the workpiece. According to customers special needs, we made custom machine.
*The manufacturer always performs product improvements to achieve the best possible performance. All dimensions and design characteristics shown in this catalogue are subject to change without notice. Products specifications are based on the actual machines. The manufacturer holds explanation rights.

 

  • 1. Machine designed ti be flexible, prompt action , accurate for large-diameter outside dimeter, inside diameter and flat double-ended chamfering.
  • 2. Designed and engineered for chamfering and trimming inner and outer end angles on circular pipe or bar    stock at one time, providing efficient and precise performance.
  • 3. Delicate clamping vise and cutter head ensure high concentricity of results.
  • 4. Specially designed cutter head and standardized cutter make cutter adjustment easy.
  • 5. Simple structure made possible by shaft server motor drive and cam-feeding with the same motion and shorten cycle time. Easy setting and fast adjustment by touch sensing screen.
  • 6. This machine is divided into FHC-A120EA into A, B, C type OD ThicknessT0.8~5mm (Standard).
  • 7. This machine is divided into FHC-B120EA into A, B, C type OD ThicknessT0.8~12mm (Optional).
  • 8. Easy operation allows one person to control multiple machines.
  • 9. Motion cycle includes automatic material in feed through a channel(automatic feeder is optional). Automatic cutting feeding retracting and automatic workpiece out feed. Continuous motion cycles provide high machining speed, high accuracy, reduced labor requirement and easy operation while greatly upgrading productivity.

Standard Cutter、Clamp、Cutter Bit

 ?Ø16~Ø10 Chamfering inner and outter angles 
  ?Ø10~Ø3.2 Chamfering inner and outter angles

?Ø5~Ø12 Optional cutter head

  ?Ø12~Ø52 Standard cutter head (MAX Ø60)

?Ø25~Ø80 Ø25~Ø150 Standard cutter head

?FHC-75EA   Clamping mold
?FHC-120EA Clamping mold

 ?Chamfering samples

?New cutter head Φ12 ~Φ120

?Twin head chamfering clmap Ø12~Ø52

?82SA Standard clamp Ø10~Ø80
?150SA Standard clampØ25~Ø150
?170SA Optional clamp Ø50~Ø170

?Standard cutterhead for left and right x 2 sets
?Circular clamp two pieces in one set

?Custom cutterhead
?Custom circular clamp
?Vibration or ATF. Automatic carriage feeder
?End Knurling Device
?Mist cooling device